.png){kind=spacer}
SERVO MOTORS & CONTROL BOXES, CLUTCH MOTORS, PNEUMATIC MOTORS, SYNCHRONIZERS, OPERATION PANELS, and PROGRAMMERS
.png "JUKI SERVO MOTORS AND CONTROL BOXES, JUKI OPERATION PANELS")
.png "HO HSING SERVO MOTORS AND CONTROL BOXES")
.png "CONSEW SERVO MOTORS - CONSEW CLUTCH MOTORS")
.png "JUKI SC-921/M51N CONTROL BOX & SERVO MOTOR SC-922/M51N CONTROL BOX")
.jpg "JUKI SC-921/M51N CONTROL BOX & SERVO MOTOR SC-922/M51N")
JUKI
SC-921/M51N
CONTROL BOX & SERVO MOTOR
SC-922/M51N
CONTROL BOX & SERVO MOTOR
The new model control box SC-921 and SC-922 have been newly developed. The control boxs are resistant to voltage fluctuations, noise and vibration. The new model control boxs are provided with an energy-saving mode for the first time in a control box for sewing machines.
High-torque AC servomotor M51N with an output of 750W has been adopted. The machine has excellent high-speed sewingperformance and a strong cloth-penetrating force.
.png "JUKI CP-18 OPERATION PANEL")
JUKI
CP-18 OPERATION PANEL
The CP-18 is applicable to the SC-921,922/M51N.
Note: The sewing machine will not operate unless a
JUKI (CP) or JUKI (IT) operation panel is installed.
.png "JUKI CP-180 OPERATION PANEL")
JUKI
CP-180 OPERATION PANEL
The CP-180 is applicable to the SC-921,922/M51N.
The CP-180 is recommended for sewing difficult-to-sew materials, hard-to-sew parts or for processes in which lots of setup changes are required. With the CP-180, in addition to the functions of the CP-18, the speed of stitch adjustment, ON/OFF of the automatic thread trimmer, automatic reverse stitching, double-reverse stitching, constant-dimension sewing, rectangular stitching and multi-layer stitching can be changed over with a finger-tip control, thereby substantially reducing the length of time required for setup changing.
Note: The sewing machine will not operate unless
JUKI (CP) or JUKI (IT) operation panel is installed.
.png "JUKI IT-100A SUPPORTING OPERATION PANEL")
JUKI
IT-100A SUPPORTING OPERATION PANEL
Note: The sewing machine will not operate unless a
JUKI (CP) or JUKI (IT) operation panel is installed.
.png "JUKI IP-420 PROGRAMMING DEVICE/ OPERATION PANEL")
JUKI
IP-420 PROGRAMMING DEVICE/ OPERATION PANEL
Note: The sewing machine will not operate unless a JUKI (IP) programming device/ operation panel installed.
.png "JUKI LIMISERVO X - G SERIES XL-G554-10(Y)/ XC-GMFY(CE)")
.jpg "JUKI LIMISERVO XL-G554-10(Y)/ XC-GMFY(CE) XL-G554-20(Y)/ XC-GMFY(CE)")
JUKI LIMISERVO X - G SERIES
XL-G554-10(Y)/ XC-GMFY(CE)
SERVO MOTOR and CONTROL BOX
(110 Volts)
XL-G554-20(Y)/ XC-GMFY(CE)
SERVO MOTOR and CONTROL BOX
(220 Volts)
The LIMISERVO X G Series includes auto thread trimming, presser foot lifting, fixed-stitch stitching, continuous stitching and backtacking.When connected to operation panel, there are step sequence, simple sequence and PC communication functions. Equipped with 8 solenoid drive outputs, 2 electromagnetic valve outputs, 1 small-signal output and 14 input terminals including variable voltage input.
- STEP SEQUENCE FUNCTION
- This function enables easy programming of the desired input, output and machining operation conditions in sequence with the stitching process.
- Various operations can now be incorporated into the “stitching process”, including those performed before and after operation.
.png "CONSEW CSM1001 and CSM2001 SERVO MOTOR WITH NEEDLE POSITIONER")
.jpg "CONSEW CSM1001 3/4 HP (550 Watt) Brushless Servo Motor")
CONSEW CSM1001
SERVO MOTORWITH NEEDLE POSITIONER
(110 VOLTS)
CONSEW CSM2001
SERVO MOTORWITH NEEDLE POSITIONER
(220 VOLTS)
The CSM1001 and CSM2001 are both 3/4 HP (550 Watt) Brushless Servo Motors that include a Needle Positioner (synchronizer).
.jpg "CONSEW CSM1001 3/4 HP (550 Watt) Brushless Servo Motor")
Note: The CSM1000 and CSM2000 are the same model without the synchronizer.
- • No Noise when machine is not running
- • No Vibration when machine is not running
- • Draws Minimal Electricity when machine is not running
- • Includes the Needle Positioner (synchronizer) Motor will run with or without the synchronizer.
- • Uses the same mounting holes as a clutch motor
- • Easy to adjust speed & motor direction with buttons
- • No clutch disc
- • Adjustable belt tightener
- • Belt guard, pulley & mounting hardware included
- • Light weight Approx. 10 - 12 lbs (5 kgs)
- • Starts-up at low speed
- • Works well on heavy duty machines
- (Models ending in "0" do NOT include the Needle Positioner - synchronizer.)
.png "CONSEW CSM5003 SERVO MOTOR and CONSEW CSM6003")
CONSEW CSM5003
SERVO MOTOR
(110 VOLTS)Automatic Footlift Capability and Needle Position Synchronizer.
CONSEW CSM6003
SERVO MOTOR
(220 VOLTS)
Automatic Footlift Capability and Needle Position Synchronizer.1.35 HP (1000 Watt) Brushless Servo MotorEnergy Efficient – Saves up to 70% Electricity
- • Powerful 1.35 HP (1000 Watt) Specially made for Extra-heavy duty machines
- • Comes with Fooflift outlet
- • Comes with Reverse outlet
- • Adjustable Soft-Start Feature
- • Uses the same mounting holes as a clutch motor
- • Needle Positioning
- • No Noise when machine is not running
- • No Vibration when machine is not running
- • Draws Minimal Electricity when machine is not running
- • Ultra High Torque D.C. Electronic Servo Motor
- • Easy to adjust speed & motor direction with digital controls
- • No clutch disc / No brushes
- • Adjustable belt tightener, Belt guard, pulley & mounting hardware included
- • Light weight
.png "CONSEW CSM550-1 PREMIER SERVO MOTOR and CONSEW CSM400 PREMIER SERVO")
.jpg "CONSEW CSM550-1 and CSM400 SERVO MOTOR with SPEED CONTROL")
CONSEW CSM550-1
PREMIER SERVO MOTOR
(110 VOLTS/ 550 Watts)WITH SPEED CONTROL
CONSEW CSM400
PREMIER SERVO MOTOR
(110 VOLTS/ 400 Watts)
WITH SPEED CONTROL
Electronic Servo Motor: 0 - 3450 RPMPremier CSM550-1: 550 Watts, ¾ Horsepower, 110 V., Single-Phase, Energy Saving, Electronic Servo Motor.
- • Energy efficient circuitry saves electricity costs
- • Quiet operation, silent when in stopped position
- • Uses the same mounting holes as a clutch motor
- • High Torque D.C. Electronic Servo Induction Motor
- • Switch, Cord and Plug included
- • Easy to adjust speed with the Control Knob
- • Reversible with Switch
- • No clutch or brake disc required
- • Lightweight: 15.5 lbs. (17 lbs. shipping weight)
- • Belt guard, pulley and mounting hardware included
- • 110V light adapter
- • Vibration absorbing rubber motor mounts
- • Also available in 220V - Model CSM550-1/220V
.png "CONSEW P SERIES CLUTCH MOTOR MODELS:")
CONSEW CLUTCH MOTOR MODELS:
P20 1/2 H.P. 3450 R.P.M.P22 1/2 H.P. 1725 R.P.M.P17 3/4 H.P. 3450 R.P.M.P24 3/4 H.P. 1725 R.P.M.
P-Series Premium Heavy Duty Clutch Motors
Single Phase, 110VAC / 220VAC, Made in TaiwanSpeeds: 3450 RPM and 1750 RPMHorsepower: 1/2HP and 3/4HP
- •Quiet – Limited Vibration
- •Energy Efficient Circuitry
- •Cool Running
- •Vibration Absorbing Rubber Motor Mounts
- •Built-in 6v. Light Receptacle
- •Amco Style Pulley
- •Sealed Bearings
- •Belt Guard
- •Dual Voltage (110/ 220 vac, single phase)
- •Easy Switch to Change Voltage
- •Complete with On/Off Switch
.png "CONSEW M7D and M1D KP SERIES CONTINUOUS RUN MOTORS")
CONSEW M7D and M1D
KP SERIES CONTINUOUS RUN MOTORS
M7D: 1/2 HP 1-Phase 110/220 Volts,
50/60Hz., 1425/1725 RPM
M1D: 1/2 HP 3-Phase 220/380 Volts,
50/60Hz., 1425/1725 RPM
For all BUTTON SEWING MACHINES, BAR TACKERS,
and SPECIAL PURPOSE EQUIPMENT
- • All Ball Bearing Construction
- • Belt Tension Adjuster
- • Belt Guard
- • 6 Volt, 17 Watt Light Tap
- • Rubber Vibration Isolators
- • 3/4" Pulley Shaft
- • Pre-Wired Push Button Switches Available
.png "MERROW INDUSTRIAL AIR MOTOR INDUSTRIAL AIR MOTOR")
MERROW INDUSTRIAL AIR MOTOR
INDUSTRIAL AIR MOTORFor Wet Processing & Finishing
- Safe for Wet Processes
- Quiet
- Half The Weight Of Standard Clutch And Servo Motors
- Standard Under Table Moun
- Output 1.7 hp
- Maximum Speed 4000 RPM
- Weight: 13 Lbs.
HO HSING
G SERIES SERVO MOTORS
G40-1-00-220
(220 VOLTS/ 400 WATTS)
SERVO MOTOR with SPEED CONTROL
G60-1-00-220(220 VOLTS/ 600 WATTS)
SERVO MOTOR with SPEED CONTROL
G60-2-GL-220(220 VOLTS/ 600 WATTS)
SERVO MOTOR with SPEED CONTROL
with OUTPOUT for PNEUMATIC FOOTLIFTER
700-1
EXTERNAL SYNCHRONIZER
NEEDLE POSITIONER
HO HSING
MH SERIES SERVO MOTOR and CONTROL BOX
To replace the successful MA series, thepowerful 600 Watt MH series ensures highperformance on your light or medium weightlockstitch, overlock or interlock applications.Suitable for many automatic machines withreverse, trimming, wiping, tension releaseand presser foot lift.
Unlike the MA series, on MH series allsettings can also be made on the controlbox, therefore, C200M operating panel isoptional.
Available models: in 600 Watt for Brother, Juki, and Mitsubishi.
HO HSING
i90 SERIES SERVO MOTOR and CONTROL BOX
This motor needs no further introduction, with itshigh torque and solid motor body i90M seriessupersedes the world wide famous HVP-90series and is suitable to drive even heavy dutymachines like Dürkopp Adler 204. With its greatvariety of functions it can be used on a widerange of special sewing machine applications.
Available models: in 550 Watt for Brother, Juki and Mitsubishi
Available models: in 750 Watt for Dürkopp Adler and Mitsubishi
.png "HO HSING C-200 OPERATION PANEL")
HO HSINGC-200 OPERATION PANEL
The C-200 is applicable to the MH SERIES and i90 SERIES
The C-200 is applicable to the MH SERIES and i90 SERIES